Description
Ivoclar Vivadent Programat CS4
Ivoclar Vivadent Programat CS4 is a compact multifunction furnace for dental practices. A clearly arranged membrane-sealed keypad with graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.
Advantages:
- Fast sintering of IPS e.max ZirCAD
- Crystallisation of IPS e.max CAD
- Glaze program for IPS e.max ZirCAD, IPS e.max CAD and IPS Empress CAD
- High processing capacity (up to six units)
- Open system
- Simple and language-independent operation due to the proven combination of membrane-sealed keypad and graphic display
- Power Saving Technology
- Compact design
- Possibility of on-site temperature calibration
- OSD (Optical Status Display)
- Remote control via PC/laptop by means of PrograBase3 software
Key features
- The firing chamber can be heated up to 1600 ° C;
- The electronics with the corresponding software controls the sintering program;
- There is a constant comparison between the actual and the set temperature;
- The sintering table can accommodate up to 6 single restorations at the same time
Features of the model
- Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
- Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
- Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).
Application
- Sintering and glazing of ZrO 2 materials (eg IPS e.max ZirCAD);
- Crystallization and glazing (e.g. IPS e.max CAD).
- The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.
| Specification | |
| Power supply | 118-240 V / 50-60 Hz |
| Overvoltage category | II |
| Pollution degree | 2 |
| Allowable voltage fluctuations | + – 10% |
| Maximum current consumption | 16A @ 118V, 8A @ 240V |
| Electrical fuses | 250 V / T 16 A (heating element) |
| Fuse size | diameter 5 x 20 mm |
| Closed oven dimensions | depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm |
| Useful chamber volume | diameter – 80 mm, height – 80 mm |
| Maximum firing temperature | 1600 ° C |
| Weight | bottom 10 kg, furnace head 17 kg |
Reviews
There are no reviews yet.